rt192>?
Exec commands:
access-enable Create a temporary Access-List entry
access-profile Apply user-profile to interface
clear Reset functions
connect Open a terminal connection
disable Turn off privileged commands
disconnect Disconnect an existing network connection
enable Turn on privileged commands
exit Exit from the EXEC
help Description of the interactive help system
lock Lock the terminal
login Log in as a particular user
logout Exit from the EXEC
modemui Start a modem-like user interface
name-connection Name an existing network connection
pad Open a X.29 PAD connection
ping Send echo messages
ppp Start IETF Point-to-Point Protocol (PPP)
resume Resume an active network connection
rlogin Open an rlogin connection
show Show running system information
slip Start Seri
systat Display information about terminal lines
telnet Open a telnet connection
terminal Set terminal line parameters
traceroute Trace route to destination
tunnel Open a tunnel connection
udptn Open an udptn connection
where List active connections
x28 Become an X.28 PAD
x3 Set X.3 parameters on PAD
rt192>telnet
Host: 5.0.0.1
Trying 5.0.0.1 ...
% Destination unreachable; gateway or host down
rt192>show
% Type "show ?" for a list of subcommands
rt192>show ?
aaa Show AAA values
backup Backup status
c1700 Show c1700 information
caller Display information about dialup connections
cca CCA information
cdapi CDAPI information
class-map Show QoS Class Map
clock Display the system clock
cns CNS subsystem
compress Show compression statistics
connection Show Connection
controllers Interface controller statu
crm Carrier Resource Manager info
dialer Dialer parameters and statistics
exception exception informations
flash: display information about flash: file system
history Display the session command history
hosts IP domain-name, lookup style, nameservers, and host table
ip IP information
location Display the system location
modemcap Show Modem Capabilities database
policy-map Show QoS Policy Map
ppp PPP param
queue Show queue contents
queueing Show queueing configuration
radius Shows radius information
rmon rmon statistics
rtr Service Assurance Agent (SAA)
sessions Information about Telnet connections
snmp snmp statistics
tacacs Shows tacacs+ server statistics
template Template information
terminal Display terminal configuration parameters
traffic-shape traffic rate shaping configuration
trunk Trunk info
users Display information about terminal lines
version System hardware and software status
rt192>show sh c
^
% Invalid input detected at '^' marker.
rt192>sh
rt192>show c
rt192>show c1700
C1700 Platform Information:
Interrupts:
Assigned Handlers...
Vect Handler # of Ints Name
01 801CC81C 00015EE2 MPC860P TIMER INTERRUPT
02 802054D4 000001A7 16552 Con/Aux Interrupt
03 802028B8 00000000 Timebase Reference Interrupt
04 80211200 0000002F WIC Network IO Int & pquicc fec speed/dup INT hand
ler
05 80211248 0000001F MPC860P CPM INTERRUPT
13 8001315C 0000002D pquicc fec interrupt
IOS Priority Masks...
Level 00 = [ 7C040000 ]
Level 01 = [ 7C040000 ]
Level 02 = [ 7C040000 ]
Level 03 = [ 7C040000 ]
Level 04 = [ 70000000 ]
Level 05 = [ 60000000 ]
Level 06 = [ 40000000 ]
Level 07 = [ 00000000 ]
SIU_IRQ_MASK = FFFFFFFF SIEN = 7C04xxxx Current Level = 00
Spurious IRQs = 00000000 SIPEND
Interrupt Throttling:
Throttle Count = 00000000 Timer Count = 00000000
Netint usec = 00000FA0 Netint Mask usec = 000003E8
Active = 0 Configured = 0
Longest IRQ = 00000000
IDMA Status:
Requests = 00000002 Drops = 00000000
Complete = 00000002 Post Coalesce Frames = 00000002
Giant = 00000000
Available Blocks = 256/256
rt192>?
Exec commands:
access-enable Create a temporary Access-List entry
access-profile Apply user-profi
clear Reset functions
connect Open a terminal connection
disable Turn off privileged commands
disconnect Disconnect an existing network connection
enable Turn on privileged commands
exit Exit from the EXEC
help Description of the interactive help system
lock Lock the terminal
login Log in as a particular user
logout Exit from the EXEC
modemui Start a modem-like user interface
name-connection Name an existing network connection
pad Open a X.29 PAD connection
ping Send echo messages
ppp Start IETF Point-to-Point Protocol (PPP)
resume Resume an active network connection
rlogin Open an rlogin connection
show Show running system information
slip Start Serial-line IP (SLIP)
systat Display information about terminal lines
rt192>show interface
FastEthernet0 is up, line protocol is u
Hardware is PQUICC_FEC, address is 000e.381b.956a (bia 000e.381b.956a)
Internet address is 172.16.142.183/24
MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full-duplex, 100Mb/s, 100BaseTX/FX
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:02:16, output 00:00:06, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Tota
Queueing strategy: fifo
Output queue :0/40 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
3 packets input, 753 bytes
Received 3 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog
0 input packets with dribble condition detected
63 packets output, 6403 bytes, 0 underruns
2 output errors, 0 collisions, 2 interface resets
0 babbles, 0 late collision, 0 deferr
2 lost carrier, 0 no carrier
0 output buffer failures, 0 output buffers swapped out
Serial0 is up, line protocol is down
Hardware is PowerQUICC Serial
Internet address is 10.0.0.17/30
MTU 1500 bytes, BW 128 Kbit, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation HDLC, loopback not set
Keepalive set (10 sec)
Last input never, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Tot
Queueing strategy: weighted fair
Output queue: 1/1000/64/0 (size/max total/threshold/drops)
Conversations 1/2/32 (active/max active/max total)
Reserved Conversations 0/0 (allocated/max allocated)
Available Bandwidth 96 kilobits/sec
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
37 packets output, 1479 bytes, 0 underruns
0 output errors, 0 collisions, 20 interface resets
0 output buffer failures, 0 output buffers swapped out
28 carrier transitions
DCD=up DSR=up DTR=up RTS=up CTS=up
Serial1 is administratively down, line protocol is down
Hardware is PowerQUICC Serial
MTU 1500 bytes, BW 128 Kbit, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation HDLC, loopback not set
Keepalive set (10 sec)
Last input never, output ne
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: weighted fair
Output queue: 0/1000/64/0 (size/max total/threshold/drops)
Conversations 0/0/32 (active/max active/max total)
Reserved Conversations 0/0 (allocated/max allocated)
Available Bandwidth 96 kilobits/sec
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 output buffer failures, 0 output buffers swapped out
0 carrier transitions
DCD=down DSR=down DTR=down RTS=down CTS=down
rt192>en
rt192#erase st
Erasing the nvram filesystem will remove all files! Continue? [confirm]y[OK]
Erase of nvram: complete
rt192#
rt192#
rt192#
rt192#
rt192#
rt192#
rt192#
*Mar 1 00:09:55.635: %SYS-7-NV_BLOCK_INIT: Initialized the geometry of nvram
rt192#
System Bootstrap, Version 12.2(7r)XM2, RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 2003 by cisco Systems, Inc.
C1700 platform with 65536 Kbytes of main memory
program load complete, entry point: 0x80008000, size: 0x416f70
Self decompressing the image : #################################################
################################### [OK]
Restricted Rights Lege
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco Internetwork Operating System Software
IOS (tm) C1700 Software (C1700-Y-M), Version 12.2
)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Thu 23-Oct-03 13:28 by eaarmas
Image text-base: 0x80008124, data-base: 0x807E50A4
cisco 1721 (MPC860P) processor (revision 0x300) with 58983K/6553K bytes of memor
y.
Processor board ID FOC07461TDY (2667377688), with hardware revision 0000
MPC860P processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)
2 Low-speed serial(sync/async) network interface(s)
32K bytes of non-volatile configuration memory.
32768K bytes of processor board System flash (Read/Write)
--- System Configuration Dialog ---
Would you like to enter the initial configuration dialog? [yes/no]: no
Would you like to terminate autoinstall? [yes]: y
Press RETURN to get started!
*Mar 1 00:00:ne protocol on Interface FastEthernet0, changed state to down
*Mar 1 00:00:54.563: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) C1700 Software (C1700-Y-M), Version 12.2(11)T10, RELEASE SOFTWARE (fc3
)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Thu 23-Oct-03 13:28 by eaarmas
*Mar 1 00:00:54.571: %SNMP-5-COLDSTART: SNMP agent on host Router is undergoing
a cold start
Router>?
Exec commands:
access-enable Create a temporary Access-List entry
access-profile Apply user-profile to interface
clear Reset functions
connect Open a terminal connection
disable Turn off privileged commands
disconnect Disconnect an existing network connection
enable Turn on privileged commands
exit Exit from the EXEC
help Description of the interactive help system
lock Lock the terminal
login Log in as a particular user
logout Exit from the EXEC
modemui Start a modem-like user interface
name-connection Name an existing network connection
pad Open a X.29 PAD connection
ping Send echo messages
ppp Start IETF Point-to-Point Protocol (PPP)
resume Resume an active network connection
rlogin Open an rlogin connection
show Show running system information
slip Start Serial-line IP (SLIP)
--More--
rt192>?
Exec commands:
access-enable Create a temporary Access-List entry
access-profile Apply user-profile to interface
clear Reset functions
connect Open a terminal connection
disable Turn off privileged commands
disconnect Disconnect an existing network connection
enable Turn on privileged commands
exit Exit from the EXEC
help Description of the interactive help system
lock Lock the terminal
login Log in as a particular user
logout Exit from the EXEC
modemui Start a modem-like user interface
name-connection Name an existing network connection
pad Open a X.29 PAD connection
ping Send echo messages
ppp Start IETF Point-to-Point Protocol (PPP)
resume Resume an active network connection
rlogin Open an rlogin connection
show Show running system information
slip Start Seri
systat Display information about terminal lines
telnet Open a telnet connection
terminal Set terminal line parameters
traceroute Trace route to destination
tunnel Open a tunnel connection
udptn Open an udptn connection
where List active connections
x28 Become an X.28 PAD
x3 Set X.3 parameters on PAD
rt192>telnet
Host: 5.0.0.1
Trying 5.0.0.1 ...
% Destination unreachable; gateway or host down
rt192>show
% Type "show ?" for a list of subcommands
rt192>show ?
aaa Show AAA values
backup Backup status
c1700 Show c1700 information
caller Display information about dialup connections
cca CCA information
cdapi CDAPI information
class-map Show QoS Class Map
clock Display the system clock
cns CNS subsystem
compress Show compression statistics
connection Show Connection
controllers Interface controller statu
crm Carrier Resource Manager info
dialer Dialer parameters and statistics
exception exception informations
flash: display information about flash: file system
history Display the session command history
hosts IP domain-name, lookup style, nameservers, and host table
ip IP information
location Display the system location
modemcap Show Modem Capabilities database
policy-map Show QoS Policy Map
ppp PPP param
queue Show queue contents
queueing Show queueing configuration
radius Shows radius information
rmon rmon statistics
rtr Service Assurance Agent (SAA)
sessions Information about Telnet connections
snmp snmp statistics
tacacs Shows tacacs+ server statistics
template Template information
terminal Display terminal configuration parameters
traffic-shape traffic rate shaping configuration
trunk Trunk info
users Display information about terminal lines
version System hardware and software status
rt192>show sh c
^
% Invalid input detected at '^' marker.
rt192>sh
rt192>show c
rt192>show c1700
C1700 Platform Information:
Interrupts:
Assigned Handlers...
Vect Handler # of Ints Name
01 801CC81C 00015EE2 MPC860P TIMER INTERRUPT
02 802054D4 000001A7 16552 Con/Aux Interrupt
03 802028B8 00000000 Timebase Reference Interrupt
04 80211200 0000002F WIC Network IO Int & pquicc fec speed/dup INT hand
ler
05 80211248 0000001F MPC860P CPM INTERRUPT
13 8001315C 0000002D pquicc fec interrupt
IOS Priority Masks...
Level 00 = [ 7C040000 ]
Level 01 = [ 7C040000 ]
Level 02 = [ 7C040000 ]
Level 03 = [ 7C040000 ]
Level 04 = [ 70000000 ]
Level 05 = [ 60000000 ]
Level 06 = [ 40000000 ]
Level 07 = [ 00000000 ]
SIU_IRQ_MASK = FFFFFFFF SIEN = 7C04xxxx Current Level = 00
Spurious IRQs = 00000000 SIPEND
Interrupt Throttling:
Throttle Count = 00000000 Timer Count = 00000000
Netint usec = 00000FA0 Netint Mask usec = 000003E8
Active = 0 Configured = 0
Longest IRQ = 00000000
IDMA Status:
Requests = 00000002 Drops = 00000000
Complete = 00000002 Post Coalesce Frames = 00000002
Giant = 00000000
Available Blocks = 256/256
rt192>?
Exec commands:
access-enable Create a temporary Access-List entry
access-profile Apply user-profi
clear Reset functions
connect Open a terminal connection
disable Turn off privileged commands
disconnect Disconnect an existing network connection
enable Turn on privileged commands
exit Exit from the EXEC
help Description of the interactive help system
lock Lock the terminal
login Log in as a particular user
logout Exit from the EXEC
modemui Start a modem-like user interface
name-connection Name an existing network connection
pad Open a X.29 PAD connection
ping Send echo messages
ppp Start IETF Point-to-Point Protocol (PPP)
resume Resume an active network connection
rlogin Open an rlogin connection
show Show running system information
slip Start Serial-line IP (SLIP)
systat Display information about terminal lines
rt192>show interface
FastEthernet0 is up, line protocol is u
Hardware is PQUICC_FEC, address is 000e.381b.956a (bia 000e.381b.956a)
Internet address is 172.16.142.183/24
MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full-duplex, 100Mb/s, 100BaseTX/FX
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:02:16, output 00:00:06, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Tota
Queueing strategy: fifo
Output queue :0/40 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
3 packets input, 753 bytes
Received 3 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog
0 input packets with dribble condition detected
63 packets output, 6403 bytes, 0 underruns
2 output errors, 0 collisions, 2 interface resets
0 babbles, 0 late collision, 0 deferr
2 lost carrier, 0 no carrier
0 output buffer failures, 0 output buffers swapped out
Serial0 is up, line protocol is down
Hardware is PowerQUICC Serial
Internet address is 10.0.0.17/30
MTU 1500 bytes, BW 128 Kbit, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation HDLC, loopback not set
Keepalive set (10 sec)
Last input never, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Tot
Queueing strategy: weighted fair
Output queue: 1/1000/64/0 (size/max total/threshold/drops)
Conversations 1/2/32 (active/max active/max total)
Reserved Conversations 0/0 (allocated/max allocated)
Available Bandwidth 96 kilobits/sec
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
37 packets output, 1479 bytes, 0 underruns
0 output errors, 0 collisions, 20 interface resets
0 output buffer failures, 0 output buffers swapped out
28 carrier transitions
DCD=up DSR=up DTR=up RTS=up CTS=up
Serial1 is administratively down, line protocol is down
Hardware is PowerQUICC Serial
MTU 1500 bytes, BW 128 Kbit, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation HDLC, loopback not set
Keepalive set (10 sec)
Last input never, output ne
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: weighted fair
Output queue: 0/1000/64/0 (size/max total/threshold/drops)
Conversations 0/0/32 (active/max active/max total)
Reserved Conversations 0/0 (allocated/max allocated)
Available Bandwidth 96 kilobits/sec
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 output buffer failures, 0 output buffers swapped out
0 carrier transitions
DCD=down DSR=down DTR=down RTS=down CTS=down
rt192>en
rt192#erase st
Erasing the nvram filesystem will remove all files! Continue? [confirm]y[OK]
Erase of nvram: complete
rt192#
rt192#
rt192#
rt192#
rt192#
rt192#
rt192#
*Mar 1 00:09:55.635: %SYS-7-NV_BLOCK_INIT: Initialized the geometry of nvram
rt192#
System Bootstrap, Version 12.2(7r)XM2, RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 2003 by cisco Systems, Inc.
C1700 platform with 65536 Kbytes of main memory
program load complete, entry point: 0x80008000, size: 0x416f70
Self decompressing the image : #################################################
################################### [OK]
Restricted Rights Lege
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco Internetwork Operating System Software
IOS (tm) C1700 Software (C1700-Y-M), Version 12.2
)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Thu 23-Oct-03 13:28 by eaarmas
Image text-base: 0x80008124, data-base: 0x807E50A4
cisco 1721 (MPC860P) processor (revision 0x300) with 58983K/6553K bytes of memor
y.
Processor board ID FOC07461TDY (2667377688), with hardware revision 0000
MPC860P processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)
2 Low-speed serial(sync/async) network interface(s)
32K bytes of non-volatile configuration memory.
32768K bytes of processor board System flash (Read/Write)
--- System Configuration Dialog ---
Would you like to enter the initial configuration dialog? [yes/no]: no
Would you like to terminate autoinstall? [yes]: y
Press RETURN to get started!
*Mar 1 00:00:ne protocol on Interface FastEthernet0, changed state to down
*Mar 1 00:00:54.563: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) C1700 Software (C1700-Y-M), Version 12.2(11)T10, RELEASE SOFTWARE (fc3
)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Thu 23-Oct-03 13:28 by eaarmas
*Mar 1 00:00:54.571: %SNMP-5-COLDSTART: SNMP agent on host Router is undergoing
a cold start
Router>?
Exec commands:
access-enable Create a temporary Access-List entry
access-profile Apply user-profile to interface
clear Reset functions
connect Open a terminal connection
disable Turn off privileged commands
disconnect Disconnect an existing network connection
enable Turn on privileged commands
exit Exit from the EXEC
help Description of the interactive help system
lock Lock the terminal
login Log in as a particular user
logout Exit from the EXEC
modemui Start a modem-like user interface
name-connection Name an existing network connection
pad Open a X.29 PAD connection
ping Send echo messages
ppp Start IETF Point-to-Point Protocol (PPP)
resume Resume an active network connection
rlogin Open an rlogin connection
show Show running system information
slip Start Serial-line IP (SLIP)
systat Display information about terminal lines
telnet Open a telnet connection
terminal Set terminal line parameters
traceroute Trace route to destination
tunnel Open a tunnel connection
udptn Open an udptn connection
where List active connections
x28 Become an X.28 PAD
x3 Set X.3 parameters on PAD
Router>
| ©cqgclub 2007 | Contact |
|
Votre @IP : 38.107.191.95 |